COVID-19 Announcement: Due to the current situation, unfortunately deliveries are taking up to 5 working days to be delivered.

Sort by:

Park Tool 761S Cutter & Reamer Campagnolo Integrated Headsets For HTR-1 - Pack of 2

Used with the HTR-1 Head tube Reaming and Facing Set and the 750 centering cone adapter (purchased separately), the 761 Reaming and Facing Cutters are used to machine head tubes...
£373.99

Park Tool 756S Cutters & Reamers 41 MM / 45 Degree Integrated Headsets For HTR-1 - Pack of 2

Replacement cutter for HTR-1 tool to face and ream integrated headset systems Facing improves the alignment of bearings in the headset The Park tool 756-S set will ream and face...
£373.99

Park Tool 758.2 Cutter & Reamer 1.5 Inch Headsets For HTR-1 & HTR-1B

The Park Tool 758.2 will ream and face the head tubes of bikes that use the OnePointFive Interface Standard The 758.2 is designed for use with the Park Tool HTR-1...
£345.99

Park Tool 789 Reamer 55.95 MM For HTR-1

For use with the HTR-1 Head tube Reaming and Facing Set The 789 reams the headtube to an internal diameter at 55.95mm to accept internal headset cups with a 55.99-56.04mm...
£138.99

Park Tool 736 Handle Weldment For HTR-1

Genuine Park Tool replacement part
£139.99 £136.99

Park Tool 799 47 MM Reaming Cutter For IS47 Headset Lower Bearings

The #799 is a 47mm reamer for cutting the lower head tube on frames using an IS47 bearing assembly for a 1-1/4 integrated headset The reamer is used in conjunction...
£131.99

Park Tool 754.2 Reamer For HTR1, HTR-1B

1 1/8 inch headtube reamer for use with the Park HTR-1 and HTR-1B headtube facing and reaming setGenuine Park Tool replacement part
£97.99

Park Tool 751.2 Reamer For HTR-1 & HTR-1B

Part number 751.2, 30.1mm reamer is included with HTR-1 For headset cups with 30.2mm outside diameter, common on 1 inch steering column bikes
£92.99

Park Tool 512A Revised Sliding Cup Assembly For HHP-1, 2

Genuine Park Tool replacement part
£58.99

Park Tool 1154-3 Block CRP-2

Genuine Park Tool replacement part
£39.99

Park Tool 768 Pilot Low-Profile Headsets For HTR-1

The Park tool 768 is a 43.8mm pilot for facing head tubes using the low profile Zero Stack type headset The 768 is used with the 690-XL facer and the...
£26.99

Park Tool 737 Retaining Nut For HTR-1

Genuine Park Tool replacement part
£25.99

Park Tool 1155-3 Replacement Blade For CRP2

Single-blade for Park Tool Crown Race Puller 2 (CRP-2) Genuine Park Tool replacement part
£17.99

Park Tool 525 Spring For HHP-1, 2

Genuine Park Tool replacement part
£10.99
Just added to your wishlist:
My Wishlist
You've just added this product to the cart:
Go to cart page