Description
KUK - Countersunk Screw is not included with Port. If you require a Countersunk Screw please add required amount to basket at time of purchase.
Bike Frame Cable Ports for all internally routed Kinesis frames. If you are unsure of which cable port you require, please contact us on our live chat or by email.
Kinesis Cable Port Type 1
These ports fit the following Kinesis aluminium framesets;
Tripster AT, CX Race, CX Race Evo, Aithein Evo, Aithein Disc, 4S Disc, 4S Disc Thru Axle, Pro6 v2 and Maxlight Phase.
Type 1 Port Gear Cable has a cable stop, stopping the gear or brake cable housing, allowing the bare inner cable to run internally through the frame.
Type 1 Port Blank is a blank cap to cover the cable port if it unused.
Type 1 Port Di2 has a 6mm hole to allow a Di2 cable to pass through. It will require a 6mm Di2 bung.
Type 1 Port Brake Hose has no cable stop so allows you to run 4mm gear outer or 5mm brake outer cable internally through the frame.
Type 1 Port External has a fitting to allow you to mount a cable stop to have a cable running externally along the frame. This is usually required when running a front mech on a Pro6 or CX Race.
Kinesis Cable Port Type 2
These Head Tube ports fit the following Kinesis framesets;
Kinesis RTD.
Type 2 Port Double allows you to run two cables through one port on the headtube of an RTD.
Type 2 Port Di2 has a 6mm hole to allow a Di2 cable to pass through the headtube of an RTD. It will require a 6mm Di2 bung.
Kinesis Cable Port Type 3
These ports fit the following Kinesis framesets;
Tripster ATR v2, Racelight GF Ti Disc, Racelight GF Ti v3 and Kinesis X.
Type 3 Port Gear Cable allows has a cable stop, stopping the gear or brake cable housing for the bare inner cable to run internally through the frame.
Type 3 Port Blank is a blank cap to cover the cable port if it unused.
Type 3 Port Di2 has a 7x8mm hole to allow a Di2 cable to pass through. It will require a 7x8mm Di2 bung
Kinesis Cable Port Type 4
These ports fit the following Kinesis framesets;
Kinesis GTD, ATR v3.
Type 4 Port Blank is a blank cap to cover the cable port if it unused.
Type 4 Port Cable and Di2 has two holes, one with no cable stop for a gear or brake outer, and one for 6mm hole for a Di2 cable.
Type 4 Port One Cable has no cable stop so allows you to run 4mm gear outer or 5mm brake outer cable internally through the frame.
Type 4 Port Two Cable has two holes, both allowing you to run 4mm gear outer and/or 5mm brake outer cable internally through the frame.
Kinesis Cable Port Type 5
These ports fit the following Kinesis bikes;
Kinesis RISE and RANGE.
Type 5 Port Hose and Gear has two holes, one for 4mm gear outer and one for a hydraulic hose, both run internally through the frame.
Type 5 Port Twin has two holes, both allowing you to run 4mm gear outer internally through the frame.
Type 5 Port Triple has one large hole allowing you to run up to 3 cables internally through the frame.
Triple Cable Port for DMR Sled
Replacement triple cable port for the DMR Sled downtube.
Grommets
Blanking grommets and Di2 grommets for all our Di2 compatible Kinesis frames. For use in the predrilled Di2 holes or in the replaceable Di2 cable ports.
The 7x8mm grommet is for 8mm Di2 holes which are found in the Type 3 Ports.
All other Kinesis cable ports and frameset holes require the 6mm Di2 grommet.
Shipping
Price Match
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.